Welcome To Shabbir Mohamed Ali & Sons
Baniyas Square Street 38 Dubai
Description: The ideal workshop tool. For soldering hollow bodies, somewhat thicker sheet metal and wires, etc. With ceramic heater and wooden grip. Electrolytic copper bit, nickel=plated ( non-scaling to a high degree ). These hammer irons are used for high power requirements, such as in the body, and the installation area. Due to their construction, they are still lightweight and have excellent under extreme conditions in continuous use. The handle is made of solid beech wood.
SOLDERING IRON 'FELDHOFF' 40W
SOLDERING IRON 'FELDHOFF' 60W
SOLDERING IRON 'FELDHOFF' 75W
SOLDERING IRON 'FELDHOFF' 100W
SOLDERING IRON 'FELDHOFF' 200W
SOLDERING IRON 'FELDHOFF' 250W
SOLDERING IRON 'FELDHOFF' 300W
SOLDERING IRON 'FELDHOFF' 400W
SOLDERING IRON 'FELDHOFF' 500W
Description: These copper irons consist of 99.8% virgin copper and include the wooden handle that is attached to the iron itself. These irons are perfect for the welder who enjoys using charcoal or propane pots.Ergonomic and non-slip application.
COPPER SOLDERING IRON 50GMS GERMANY
COPPER SOLDERING IRON 150GMS GERMANY
COPPER SOLDERING IRON 200GMS GERMANY
COPPER SOLDERING IRON 250GMS GERMANY
COPPER SOLDERING IRON 300GMS GERMANY
COPPER SOLDERING IRON 400GMS GERMANY
COPPER SOLDERING IRON 500GMS GERMANY
COPPER SOLDERING IRON 600GMS GERMANY
COPPER SOLDERING IRON 800GMS GERMANY
COPPER SOLDERING IRON 1000GMS GERMANY
Description: Residue-low lead-containing solder wire for soldering of lead pipes and lead plates in plumbing. The flux distinguishes itself in high-temperature stability and is spatter-free during melting. Due to its consistency, the flux spreads very quickly over the soldering joint and accelerates the wetting.
SOLDERING WIRE "FELDER" GERMANY 1MM X 250GMS
SOLDERING WIRE "FELDER" GERMANY 1MM X 500GMS
SOLDERING WIRE "FELDER" GERMANY 1.5MM X 250GMS
SOLDERING WIRE "FELDER" GERMANY 1.5MM X 500GMS
SOLDERING WIRE "FELDER" GERMANY 2MM X 250GMS
SOLDERING WIRE "FELDER" GERMANY 2MM X 500GMS
SOLDERING WIRE "FELDER" GERMANY 3MM X 250GMS
SOLDERING WIRE "FELDER" GERMANY 3MM X 500GMS
SOLDERING WIRE "FELDER" GERMANY 4MM X 250GMS
SOLDERING WIRE "FELDER" GERMANY 4MM X 500GMS
Description: Residue-low, halide-free, no-clean solder wire. Specially adapted to the requirements of electronics manufacturing. The flux distinguishes itself in high-temperature stability and is spatter-free during melting. The light-colored, solid flux residues are either corrosive nore electrically conducting and can therefore remain on the solder joint. FELDER - ISO - Core® "EL" – LEAD-FREE has been tested and qualified by Siemens AG Berlin (Certification Body CT MM6) regarding electrical conductivity and electrolytic corrosiveness (dendrites growth). These certificates are available on request. Those solderings made with the following listed lead-free solder alloys are temperature-stable up to 150°C. A cryogenic temperature stability down to a minimum of -96°C is also ensured.
FITTING SOLDER (CU ROTIN-3) FELDER M2
FITTING SOLDER (CU ROTIN-3) FELDER M3
Description: FELDER Soldering Paste is a flux for soldering of copper pipes in cold and warm water installation. The flux distinguishes itself by the good wetting qualities and temperature stability. The residues are 100 % water removable.
SOLDERING PASTE "FELDER" GERMANY 50G
SOLDERING PASTE "FELDER" GERMANY 100G
SOLDERING PASTE "FELDER" GERMANY 250G
Description: Ready-made soft solder metal paste for pre-tinning and soft soldering of copper pipe installations in connection with fitting solder "Cu-Rotin®3". Based on zinc chloride and ammonium chloride in organic formulation, awarded the RAL mark of quality.
FITTING SOLDER PASTE (DU ROFIX-3) FELDER
Description: A hard solder flux based on boron compounds for hard soldering of copper, copper alloys, grey cast iron, malleable cast iron, and steel as well as the welding of copper alloys, e.g. brass.
BP 100 G
UNIVERSAL RAZING POWDER '' FELDER'' GERMANY 100GMS
UNIVERSAL BRAZING POWDER "FELDER" GERMANY 250GMS
Description: Lead-containing soft solder for iron soldering, flame soldering, and dip soldering baths in the metal industry. For soldering of steel and stainless steel for plumbing and roofing industry, soldering in cooler engineering and coachwork as well as dip soldering.
STR 30 / 70
SOLDERING TRINGULAR ROADS 'FELDER' 30 / 70
STR 40 / 60
SOLDERING TRINGULAR RODS ' FELDER ' 40 / 60
STR 50 / 50
SOLDERING TRINGULAR ROAD ' FELDER ' 50 / 50